Nature energy
Volume 6 Issue 4, April 2021
Making contacts
The power conversion efficiency of mainstream silicon photovoltaics is expected to saturate at 24% yet the use of charge-selective contacts that also minimize charge recombination could enable further improvements. Towards that aim, Richter et al. demonstrate a 26.0%-efficient solar cell by redesigning both the front-side (pictured) and rear-side contacts.
See Richter et al.
Image: Bernd Steinhauser, Fraunhofer ISE. Cover Design: Thomas Phillips.
Editorial
Editorial | 22 April 2021
Sharing’s caring
Our data-sharing policies continually evolve. Here we provide an overview of our current approaches.
Comment & Opinion
Comment | 14 April 2021
The impact of the Fukushima accident on nuclear power policy in Japan
11 March 2021 marked the tenth anniversary of the Fukushima Daiichi nuclear power plant accident. Today, without better public engagement and understanding of nuclear power generation and its role in the energy system mix, progress on Japan’s post-carbon strategy will remain stagnant.
- Midori Aoyagi
Advertisement Feature
The beginning of global trade in hydrogen
Liquid hydrogen to be conveyed by ship for the first time
News & Views
News & Views | 03 March 2021
Knowledge mitigates misinformation
With increasing global communications, we have experienced increasing misinformation. New research shows that mere exposure to misinformation about smart meters is related to perceptions of related risks. Increased knowledge about smart meters can reduce the impact of some misinformation but it does not work for all types.
- A. Spence
- & K. Spence
News & Views | 05 April 2021
Guided by metal–substrate bonding
The development of metallic anodes for next-generation high-energy batteries is largely hindered by dendritic growth issues. Now, an interface between metals and substrates is engineered to facilitate their strong chemical bonding, leading to uniform metal deposition and high battery cycling reversibility.
- Edward Matios
- & Weiyang Li
News & Views | 13 April 2021
Still in the game
The current mainstream photovoltaic technology used in industry has a power conversion efficiency above 23% in mass production but major further improvements are challenging. Researchers now demonstrate a 26% efficiency by implementing passivating contacts on double-side contacted solar cells.
- Robby Peibst
News & Views | 19 April 2021
Taking carbon dioxide without a grain of salt
Water-fed electrolysers are promising for conversion of carbon dioxide into fuels and chemicals, but suffer stability issues due to precipitate formation at the cathode. New research reports the prevention of salt formation at porous electrodes, bringing the technology one step closer to industrial commercialization.
- Klaas Jan P. Schouten
Policy Brief
Policy Brief | 16 April 2021
Innovative energy business models appeal to specific consumer groups but may exacerbate existing inequalities for the disengaged
Innovative energy business models, such as peer-to-peer trading or energy as a service, are attractive to different groups of customers. Disengaged consumers with low trust in the energy market could face further disadvantages, while already active consumers could reap even greater benefits, which risks widening existing socio-economic inequalities.
- Stephen Hall
- Jillian Anable
- & Yvonne Matthews
Reviews
Review Article | 11 February 2021
Designing anion exchange membranes for CO2 electrolysers
Carbon dioxide electroreduction is a promising approach to synthesize chemicals and fuels using renewable energy. This Review explores our understanding of anion exchange membranes — a key component of certain carbon dioxide electrolysers — and outlines approaches to design improved materials.
- Danielle A. Salvatore
- Christine M. Gabardo
- & Curtis P. Berlinguette
Research
Article | 01 March 2021
Matching consumer segments to innovative utility business models
Utility business models are changing to accommodate energy system decarbonization. Here the authors adopt a collaborative business model innovation process to define the business models that utilities are exploring, and then identify consumer segments based on their preferences for these new contracts.
- Stephen Hall
- Jillian Anable
- & Yvonne Matthews
Article | 01 March 2021
Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries
Coating is commonly used to improve electrode performance in batteries, but it is challenging to achieve and maintain complete coverage of electrode particles during cycling. Here the authors present a coating-and-infusion approach on Ni-rich cathodes that effectively retards stress corrosion cracking.
- Moonsu Yoon
- Yanhao Dong
- & Jaephil Cho
Article | 25 February 2021
The albedo–climate penalty of hydropower reservoirs
The darker surfaces of water reservoirs absorb more sunlight than ground surfaces, yet how much this reduces the climate benefit of hydroelectricity has not been investigated. Now, Wohlfahrt et al. demonstrate that this albedo penalty may be considerable for certain hydropower reservoirs.
- Georg Wohlfahrt
- Enrico Tomelleri
- & Albin Hammerle
Article | 11 March 2021
Rejuvenating dead lithium supply in lithium metal anodes by iodine redox
Cycling lithium batteries often results in inactive lithium that no longer participates in redox reactions, leading to performance deterioration. Here the authors use an iodic species to react with inactive lithium, bringing it back to life and thus making batteries last longer.
- Chengbin Jin
- Tiefeng Liu
- & Xinyong Tao
Article | 22 March 2021
Boron-doped nitrogen-deficient carbon nitride-based Z-scheme heterostructures for photocatalytic overall water splitting
Splitting water using suspensions of particulate carbon nitride-based photocatalysts may be a cheap way to produce hydrogen, but efficiencies have remained low. Now, Shen and colleagues use doped carbon nitride-based Z-scheme heterostructures to split water with a solar-to-hydrogen efficiency of 1.1% in the presence of metal-based co-catalysts.
- Daming Zhao
- Yiqing Wang
- & Liejin Guo
Article | 05 April 2021
Regulating electrodeposition morphology in high-capacity aluminium and zinc battery anodes using interfacial metal–substrate bonding
Using metal anodes could in principle boost the energy density of batteries but their electrodeposition often negatively impacts battery performance. Here the authors propose an oxygen-mediated metal–substrate bonding strategy to regulate metal deposition and demonstrate highly reversible Al and Zn anodes.
- Jingxu Zheng
- David C. Bock
- & Lynden A. Archer
Article | 08 April 2021
Linking solar and wind power in eastern Africa with operation of the Grand Ethiopian Renaissance Dam
The Grand Ethiopian Renaissance Dam will be hugely beneficial to Ethiopia, but has raised tensions with neighbouring countries that rely on flow from the Blue Nile. Sterl et al. present scenarios for dam operation coupled with solar and wind power generation that could mitigate some of these concerns.
- Sebastian Sterl
- Dalia Fadly
- & Wim Thiery
Article | 08 April 2021
Stabilization of formamidinium lead triiodide α-phase with isopropylammonium chloride for perovskite solar cells
The operational stability of formamidinium lead triiodide solar cells varies with the fabrication method of the perovskite layer. Now Park et al. find that isopropylammonium stabilizes the perovskite structure and leads to solar cells with 2,000-h stability under constant illumination.
- Byung-wook Park
- Hyoung Woo Kwon
- & Sang Il Seok
Article | 12 April 2021
Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses
Front- and back-junction silicon photovoltaics dominate the market thanks to a lower manufacturing complexity compared with that of other device designs yet advances in efficiency remain elusive. Richter et al. now present an optimized design for the front and back junctions that leads to a 26.0%-efficient cell.
- Armin Richter
- Ralph Müller
- & Stefan W. Glunz
Article | 19 April 2021
Operando cathode activation with alkali metal cations for high current density operation of water-fed zero-gap carbon dioxide electrolysers
Precipitates that form in the cathode of continuous-flow CO2 electrolysers hamper their long-term operation, but the alkali metals they are formed from actually boost activity. Endrődi et al. mitigate this dichotomy by using pure water in the electrolyser and periodically infusing the cathode with alkaline cations.
- B. Endrődi
- A. Samu
- & C. Janáky
Tales of Invention
Tales of Invention | 22 April 2021
From polyacetylene to carbonaceous anodes
The carbonaceous anode was the final important piece of the jigsaw for the first commercialized rechargeable lithium-ion batteries. Its original inventor recounts how the search for a research subject led to the breakthrough.
- Akira Yoshino
Amendments & Corrections
Author Correction | 16 February 2021
Author Correction: Practical assessment of the performance of aluminium battery technologies
- Ehsan Faegh
- Benjamin Ng
- & William E. Mustain
No Comment